Dishwasher Drain Repair is something most people have no idea how to do. When something goes wrong with your dishwasher it can be one of the most frustrating things you ever experience. There are certain steps you should take to make sure it does not continue to malfunction and cause you added frustration. I will tell you what some of those steps are and give you an idea if it is something you need to call a plumber to take care of.
It is very normal for dishwashers to have clogged drains. This occurs when hard water builds up and becomes too difficult to remove. Most dishwashers have a small water drain which is connected to the drain hose on the appliance. The water drain is designed to prevent the water in the sink from draining into the home.
Sometimes though, a dishwasher drain clogged with dirty water and is causing your appliance to malfunction. There are several different things you can try to unclog it yourself. If you have a self-cleaning cycle, first ensure the self-cleaning cycle is on and all of the soap has been used. Next, check under the sink to see if it is possible to dislodge some of the debris that may be blocking the drain. You could try using a long flexible wire to bend it or turn it upside down and try to pull it out.
Another way to unclog a dishwasher drain hose is to turn the power to the appliance off and unplug it. Then connect a flexible wire to the drain valve, and run water as far away from the dishwasher as possible. Check to make sure the pipe from the valve to the sink is clear. You could try lifting the drain valve and turning it counterclockwise and slowly wiggling it back and forth. Be very careful when doing this as any damage to either the pipe or the valve will result in a big mess and is much more likely to result in a broken pipe. If you cannot clear the pipe yourself, then the next step is to contact a dishwasher repair specialist.
A worn dishwasher drain valve is the most common reason for a clogged dishwasher drain. To check the valve, first unplug the appliance from the power source and depress the drain valve handle to release the air in the line. It will let you know when there is dirty water inside the line. Next, use a flashlight to check the wire insulation for signs of wear and tear.
Now that you have made the best possible decision for your dishwasher and the pipes have been replaced, you need to make sure your drain hose works the way it should. The easiest solution is to purchase and cut a length of high-quality plumbing hose that has a twist near the tip. These twist tee can be connected to your drain valve with stainless steel clamps or hook-ups. After making sure your hose works correctly, you can now connect your dishwasher drain hose replacement ge dishwasher clogged drain hose to its proper place and make sure the problem goes away.